Waterproofing
TREMproof FCW – EN
Flexible Cementitious Waterproofing Membrane DESCRIPTION TREMproof® FCW is a 2 component and flexible cementitious waterproofing coating. It consists of special polymer pre-blended resin and fillers powder with graded fine quartz. TREMproof FCW is water based, non-toxic and non-hazardous. Mixing of the two component results in a plastic, thixotropic and easily applicable compound, even to vertical […]
Detail
TREMproof 201/60 – EN
Fluid-Applied, Elastomeric Coal-Tar Free Waterproofing Single Component DESCRIPTION TREMproof 201/60 is a high solids, VOC-compliant, bitumen modified polyurethane waterproofing membrane. It is a one-part,moisture curing elastomer available in two viscosities; Self-Leveling (SL) and Roller (R) that are suitable for applications to horizontal and vertical surfaces at 1.5mm WFT (wet film thickness). Tremco Anti-Root Additive is […]
Detail
Crystalline waterproofing
in-depth waterproofing and protection slurry permanent active applied to pressure or non-pressure concrete face approved for drinking water structures grey PRODUCT DESCRIPTION VANDEX SUPER is a cementitious, ready-mixed, in-depth waterproofer. VANDEX SUPER is based on grey Portland cement. AREAS OF APPLICATION substrate: concrete active or passive waterproofing and protection againstwater and moisture foundations, slabs, retaining […]
Detail
SpECtite HP600
Mô tả Màng chống thấm dẻo polyurethane một thành phần, hàm lượng Polymer cao, nhựa đường biến đổi, dạng quét lỏng màu đen, lưu hóa khi tiếp xúc với ẩm độ không khí và tạo nên màng dẻo dai đàn hồi với khả năng chống thấm tuyệt vời và độ thẩm thấu hơi nước thấp. […]
Detail
SpECcoat Firesafe Facade
Description SpECcoat Firesafe Facade is a two-component polymer modified cementitious coating. The product may be trowel, brush or spray applied to provide a flexible, fire resistant moisture barrier to facades Applications: SpECcoat Firesafe Facade is used where there is a requirement to exclude water moisture from a building facade, while it is still breathable. Advantages: […]
Detail
SpECtop CPD Finish
Description SpECtop CPD Finish is a two pack, flexible polyurethane wearing surface forming part of the SpECtop CPD System. Applications: As a coloured finish coat over the SpECtop CPD Primer SB/SpECtop CPD Primer SF or SpECtop CPD Elastomeric Membrane as part of the SpECtop CPD System. Advantages: Hard wearing Good chemical resistance Slip resistant finish […]
Detail